
Last time I covered the physical buttons on the Heltec WiFi LoRa 32 V4-R8 kit. This post is about what you actually see and do once the device is up and running — the on-screen menu, and the channel/QR code system in the Meshtastic app, which is genuinely one of the most confusing parts for first-time users.
What is MUI?
On devices with a proper screen like this touchscreen kit, Meshtastic can run a more graphical on-device menu system that the community refers to as MUI. Compared to the simple single-line menu you'd get on a basic small-OLED Meshtastic board, MUI gives you a proper touch-navigable interface right on the device — you're not entirely dependent on the phone app just to check status or change a setting.
I'll be honest: MUI is still actively evolving, and I don't want to hand you a feature list I'm not fully sure is current by the time you read this — the exact menu layout and what's configurable on-device versus phone-only can shift between firmware versions. What I can say confidently is the general idea: it's the on-screen menu system, you navigate it with the USER/IO buttons (or touch, depending on firmware version and screen), and it's what makes a screen-equipped board meaningfully more usable on its own than a bare board that only talks to the phone app.
If something in MUI looks different from what I've described, that's more likely a firmware version difference than something wrong with your unit — Meshtastic firmware updates fairly often, and MUI is one of the parts that's changed the most.
Channels and QR codes
This is the part that confuses almost everyone at first, so let's be very explicit about it.
In Meshtastic, a QR code represents a channel. A channel is essentially a named group with its own encryption key — only devices configured with the same channel (name + key) can read each other's messages on that channel. Scanning someone else's QR code means joining the channel they created and shared. And it works the other way too: you can create your own channel in the app, and it'll generate a QR code you can share with someone else so they can scan it and join you.
Here's the thing that trips people up: when you first set up a brand-new device, you won't see a QR code or a "set up your channel" screen — and that's not a bug, it's just how the defaults work. A fresh device automatically joins the built-in "Default" channel, which is public (anyone else on Default, on the same region/frequency settings, can hear you) — so there's nothing to scan yet, because you're already on a working channel out of the box.
If you want to create a private channel of your own, or join someone else's, that all happens later, on purpose, in the app's Channels settings page — that's where you'll find the options to add a new channel, view/share your own channel's QR code, or scan someone else's. It's not hidden from you; it's just a deliberate second step rather than something forced on you during first setup.
Next time, I want to write about what's new and interesting happening in the wider Meshtastic community — there's a lot going on beyond the core app that's worth knowing about.

上一篇講了 Heltec WiFi LoRa 32 V4-R8 套件的實體按鍵。這篇要講裝置開機、配對完成之後,你實際會看到、會操作的東西——螢幕上的選單系統,還有 Meshtastic App 裡的頻道/QR Code 制度,這個部分真的是新手最容易搞混的地方。
MUI 是什麼?
像這款觸控套件這種有正經螢幕的裝置,Meshtastic 可以跑一套比較圖形化的裝置端選單系統,社群裡把它叫做 MUI。跟一般小型 OLED Meshtastic 板子上那種單行選單比起來,MUI 讓你直接在裝置上就有一個可以觸控操作的完整介面——不用完全依賴手機 App 才能看狀態、改設定。
老實說:MUI 目前還在持續演進中,我不想現在就給你一份到你讀到這篇文章時可能已經過時的功能清單——確切的選單版面、哪些設定可以在裝置上直接改、哪些只能在手機 App 上改,這些都可能隨著韌體版本變動。我可以有把握講的是大方向:它就是裝置端的螢幕選單系統,用 USER/IO 按鍵(或觸控,看螢幕跟韌體版本而定)操作,也是讓一台有螢幕的板子比起只能靠手機 App 溝通的裸板,明顯更好用的關鍵原因。
如果你看到的 MUI 畫面跟我這裡描述的不太一樣,比較可能是韌體版本不同造成的,不是你的裝置有問題——Meshtastic 韌體更新頻率不低,MUI 又剛好是變動最多的部分之一。
頻道跟 QR Code
這部分幾乎所有新手一開始都會卡住,所以我講清楚一點。
在 Meshtastic 裡,QR Code 對應的就是一個頻道(channel)。頻道基本上就是一個有自己加密金鑰的命名群組——只有設定成同一個頻道(名稱+金鑰)的裝置,才能讀懂彼此在那個頻道上的訊息。掃描別人的 QR Code,就是加入他建立、分享出來的那個頻道。反過來也一樣:你可以在 App 裡自己建立一個頻道,它會產生一組 QR Code,你可以分享給別人,讓對方掃描加入你這邊。
這裡有個常常讓人卡關的地方:第一次設定一台全新的裝置時,你不會看到 QR Code、也不會看到「設定你的頻道」畫面——這不是 bug,是預設機制本來就這樣運作。全新裝置會自動加入內建的 「Default(預設)」頻道,這是公開的(同一個地區/頻率設定下,其他在 Default 頻道上的人都聽得到你)——所以一開始根本沒有東西需要掃碼,因為你已經在一個開箱即用的頻道上了。
如果你想建立自己的私人頻道,或加入別人的頻道,這些都是之後、刻意地在 App 的 Channels(頻道) 設定頁面裡進行的——那裡才是你會找到「新增頻道」「查看/分享自己頻道的 QR Code」「掃描別人 QR Code」這些選項的地方。這些功能不是被藏起來,只是刻意設計成初次設定不會強迫你做的第二步。
下一篇我想寫寫 Meshtastic 社群最近有什麼新鮮/有趣的事——核心 App 之外還有不少值得知道的動態。